DESCRIPTION
2-way Bass reflex Active speaker – 15″+ 1″ – 700Wrms+200Wrms
FEATURES
2-way, bi-amplified, bass reflex design
Biamped: 700W RMS LF and 200W RMS HF power amplifiers in Class D for LF and in Class H/AB for HF
Digital Signal Processor with graphic display
15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
High efficiency switch mode power supply
Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
380mm (15”) LF woofer with 64mm (2.5”) voice coil, custom made for FBT
25mm (1”) exit throat B&C HF compression driver with 44mm (1.7”) voice coil
Frequency response from 42Hz to 20KHz
80°H x 50°V Constant Directivity rotatable Horn
6 x M10 suspension points, wall bracket mount thread, 35 mm (1 3/8”) top-hat speaker stand socket, two aluminium handles
45° monitor taper
Switch mode power supply
Digital processor
Floor monitor
Hardware for permanent installation
OTHER PRODUCTS
VENTIS 112A
Processed Active Speaker 700W +200W RMS – 133dB SPL
VENTIS 110A
Processed Active Speaker 700W + 200W RMS – 131dB SPL
VENTIS 206A
Processed Active Speaker 700W + 200W RMS – 131dB SPL
VENTIS 115
Passive Reinforcement speaker 500W / 8ohm – 130dB SPL
VENTIS 112
Passive Reinforcement speaker 400W / 8ohm – 129dB SPL
VENTIS 110
Passive Reinforcement speaker 300W / 8ohm – 127dB SPL
VENTIS 206
Passive Reinforcement speaker 400W / 8ohm – 127dB SPL
SPECIFICATION
Configuration: 2 way
Built-in amplifier LF/HF: 700/200 W RMS
Built-in amplifier peak LF/HF: 1400/400 W
Frequency response: 42Hz – 20KHz -6dB
Low Frequency woofer: 15 – 2.5 coil inch
High Frequency driver: 1 – 1.7 coil inch
Maximum SPL cont/peak: 127/133 dB
Dispersion: 80° x 50° rotatable HxV
Input impedance: 22 Kohm
AC Power requirements: 640 VA
Input connector: XLR with loop, RCA ST
Power cord: 5/16.4 m/ft
Net Dimension (WxHxD): 427x765x420 / 16.81×30.11×16.53 mm/inch
Net Weight: 25/55.11 Kg/lb
Transport Dimension (WxHxD): 600x865x520 / 23.62×34.05×20.47 mm/inch
Transport Weight: 29/63.93 Kg/lb
Switch mode power supply
Digital processor
Floor monitor
Hardware for permanent installation
OTHER PRODUCTS
VENTIS 112A
Processed Active Speaker 700W +200W RMS – 133dB SPL
VENTIS 110A
Processed Active Speaker 700W + 200W RMS – 131dB SPL
VENTIS 206A
Processed Active Speaker 700W + 200W RMS – 131dB SPL
VENTIS 115
Passive Reinforcement speaker 500W / 8ohm – 130dB SPL
VENTIS 112
Passive Reinforcement speaker 400W / 8ohm – 129dB SPL
VENTIS 110
Passive Reinforcement speaker 300W / 8ohm – 127dB SPL
VENTIS 206
Passive Reinforcement speaker 400W / 8ohm – 127dB SPL
OPTIONS
Back to Home Page spectrumsoundlight.co.uk
View on manufacturers site: https://www.fbtaudio.co.uk/fbt-audio/install/speakers/active/ventis-115a.htm
