DESCRIPTION
2-way Passive speaker – 10″ + 1″ – 300Wrms
FEATURES
2-way, bass reflex design
Digital Signal Processor with graphic display
15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
High efficiency switch mode power supply
Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
SPECIFICATION
Code: 40682
Configuration: 2 way
Recommended amplifier: 300 W RMS
Long Term power: 150 W
Short term power: 600 W
Nominal impedance: 8 ohm
Frequency response: 60Hz – 18KHz -6dB
Low Frequency woofer: 10 – 2 coil inch
High frequency driver: 1 – 1.4 coil inch
Sensitivity (@1W/1m): 97 dB
Maximum SPL cont/peak: 122/127 dB
Dispersion: 80° x 50° rotatable HxV
Crossover Frequency: 1.8 KHz
Recommended HP filter: HP 50Hz – 12-24dB/oct
Input connector: 2 x SPEAKON
Net Dimension (WxHxD): 329x575x325 / 12.95×22.63×12.79 mm/inch
Net Weight: 15.1/33.28 kg/lb
Transport Dimension (WxHxD): 420x675x400 / 16.53×26.57×15.74 mm/inch
Transport Weight: 17.6/38.80 kg/lb
Digital processor
Floor monitor
Hardware for permanent installation
OTHER PRODUCTS
VENTIS 115A
Processed Active Speaker 700W +200W RMS – 133dB SPL
VENTIS 112A
Processed Active Speaker 700W +200W RMS – 133dB SPL
VENTIS 110A
Processed Active Speaker 700W + 200W RMS – 131dB SPL
VENTIS 206A
Processed Active Speaker 700W + 200W RMS – 131dB SPL
VENTIS 115
Passive Reinforcement speaker 500W / 8ohm – 130dB SPL
VENTIS 112
Passive Reinforcement speaker 400W / 8ohm – 129dB SPL
VENTIS 206
Passive Reinforcement speaker 400W / 8ohm – 127dB SPL
OPTIONS
Back to Home Page spectrumsoundlight.co.uk
View on manufacturers site: https://www.fbtaudio.co.uk/fbt-audio/install/speakers/passive/ventis-110.htm
