DESCRIPTION
2-way Passive speaker – 15″ + 1″ – 500Wrms
FEATURES
2-way, bass reflex design
Digital Signal Processor with graphic display
15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
High efficiency switch mode power supply
Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
Built-in passive crossover with soft-trip protection for the LF woofer and HF driver
Speakon NL-4 IN and LINK OUT connectors
SPECIFICATION
Code: 40680
Configuration: 2 way
Recommended amplifier: 500 W RMS
Long Term power: 250 W
Short term power: 1000 W
Nominal impedance: 8 ohm
Frequency response: 50Hz – 18KHz -6dB
Low Frequency woofer: 15 – 2.5 coil inch
High frequency driver: 1 – 1.7 coil inch
Sensitivity (@1W/1m): 99 dB
Maximum SPL cont/peak: 126/130 dB
Dispersion: 80° x 50° rotatable HxV
Crossover Frequency: 1.4 KHz
Recommended HP filter: HP 40 Hz – 12-24dB/oct
Input connector: 2xSpeakon
Net Dimension (WxHxD): 427x765x420 / 16.81×30.11×16.53 mm/inch
Net Weight: 24.5/54.01 kg/lb
Transport Dimension (WxHxD): 600x865x520 / 23.62×34.05×20.47 mm/inch
Transport Weight: 28.5/52.83 kg/lb
Switch mode power supply
Digital processor
Floor monitor
Hardware for permanent installation
OTHER PRODUCTS
VENTIS 115A
Processed Active Speaker 700W +200W RMS – 133dB SPL
VENTIS 112A
Processed Active Speaker 700W +200W RMS – 133dB SPL
VENTIS 110A
Processed Active Speaker 700W + 200W RMS – 131dB SPL
VENTIS 206A
Processed Active Speaker 700W + 200W RMS – 131dB SPL
VENTIS 112
Passive Reinforcement speaker 400W / 8ohm – 129dB SPL
VENTIS 110
Passive Reinforcement speaker 300W / 8ohm – 127dB SPL
VENTIS 206
Passive Reinforcement speaker 400W / 8ohm – 127dB SPL
OPTIONS
Back to Home Page spectrumsoundlight.co.uk
View on manufacturers site: https://www.fbtaudio.co.uk/fbt-audio/install/speakers/ventis-115.htm